Mod Blade DNA60 – Vypers Vapes X Wick'd: High Performance and High-End Design

The Mod Blade DNA60 is the result of an exclusive collaboration between the Vypers Vapes and Wick'd A top-of-the-line vaping device, extremely compact, elegant and high-performance. Made from high-strength anodized 6061 aluminum, it runs on a replaceable 18650 battery (not included) and incorporates the prestigious Evolv DNA60 chipset, widely recognized for its constant power delivery, reliability and full customization via Escribe software.

Equipped with a clear 0.91” OLED screen, floating 510 pin for excellent conductivity and interchangeable side panels, it accommodates atomizers up to 25mm in diameter perfectly aligned (flush). It is the ultimate choice for enthusiasts who value customization, ergonomics and premium build.

⚠️ This product does not include a tank or coils. May contain nicotine if used with liquid. Nicotine is a substance that creates strong dependence. Not recommended for non-smokers.

View here the 18650 batteries compatible with this Mod

View here the tanks compatible with this Mod

Product Details

Brand / Collaboration: Vyper Vapes
Chipset: Evolv DNA60 (fully customizable via Escribe)
Power: adjustable from 1 to 60W
Dimensions: 72.0 x 44.0 x 25.0 mm
Material: Anodized aluminum 6061
Screen: 0.91” high-definition OLED
Batteries: Compatible with 1 x 18650 Battery (not included)
Connection: 510 thread with floating pin (spring-loaded), supports atomizers up to 25mm compatible with a wide range of atomizers
Charging / Data: USB-C port for charging and connection to EScribe software
Customization: Interchangeable side panels

Product Advantages

Ultra-compact high-end construction in 6061 aluminum.
Evolv DNA60 chipset with impeccable battery management and maximum reading precision.
Accommodates atomizers up to 25mm without protruding from the mod (flush).
Interchangeable panels for aesthetic customization to your liking.
Spring-loaded 510 pin for ideal conductivity with any atomizer.
Compatible with Escribe software for advanced configuration of profiles and power curves.

Package Contents

1 × Blade DNA60 Mod (Vypers Vapes X Wick'd)
1 × USB-C Cable
1 × Instruction Manual

Mode of Use

Insert a properly charged and good-condition 18650 battery.
Connect an atomizer compatible with 510 thread (up to 25mm in diameter) with the installed coil.
Turn the device on by giving the standard presses on the main button.
Adjust the wattage (1-60W) according to the specification and recommended range of your coil.
For advanced customization of menus, themes and TC profiles (temperature control), connect the mod to a PC via the Escribe program.

Maintenance and Care

Avoid dry hits: happens when the cotton is dry, causing a burnt taste; keep liquid in the tank to prevent it.
Regularly clean the battery contacts, connections and tank to prevent dirt buildup and loss of flavour.
Adjust the airflow and power to avoid dry hits and extend coil life.
Avoid prolonged exposure to water, dust or drops — although resistant, basic care is required.
Store the device in a dry place and away from extreme temperatures.
Store liquids in a cool place and out of reach of children and pets. Use high-quality liquids from reliable brands to preserve flavour and avoid tank damage, try different Liquids or Concentrates to vary flavour and avoid the "vaper's tongue", which occurs when the palate gets used to a single flavour. We recommend liquids 70% VG / 30% PG for coils below 0.6 ohm, and 50% VG / 50% PG for coils above 0.6 ohm.

Recommended Compatible Tanks

The Mod Blade DNA60 has a standard 510 thread with a spring-loaded pin and accepts atomizers up to 25mm in diameter without protruding. See some ideal suggestions for this device:

Tanque	Recommended Power	Features
Ambition Mods Bi2hop MTL RTA	10–20 W	RTA single-coil MTL, adjustable airflow by pins, great for flavour, simple build
Hellvape Dead Rabbit MTL 2 RTA	12–30 W	Single-coil RTA focused on advanced MTL, adjustable top airflow, excellent flavour output
Innokin Zenith II Sub-Ohm Tank	15–40 W	Versatile tank for MTL and RDL, large capacity, easy to refill, precise airflow adjustment.

Tip: To get the most out of the MOD, choose a tank that fits your vaping style and use high-quality coils for better performance.See more tanks here.

Vaping Styles and Coils

The Mod Blade DNA60 offers excellent power stability up to 60W, making it ideal for MTL and RDL vaping styles with a focus on flavour:

MTL (Mouth to Lung): a tighter draw, similar to traditional cigarette, prioritizing flavour definition and lower e-liquid consumption. Recommended coils: 0.8Ω – 1.5Ω (low to medium power).
RDL (Direct Lung): direct-to-lung vaping with controlled airflow, balancing density and flavour. Recommended coils: 0.3Ω – 0.7Ω (medium power).

Tip: adjust the coil and power according to your vaping style. MTL favors flavour and discretion, while RDL balances clouds and intensity.

Safety and Precautions

Vaping requires care, knowledge, and attention to safety. For a more comprehensive understanding of vaping and the responsible use of our products, consult the FAQ (Frequently Asked Questions) from Contraste Vaping®.
Clean the atomizer regularly to prevent residue buildup that could compromise performance and flavour.
Use only appropriate batteries of high quality, preferably original and from reliable brands. Always charge them with own chargers. Do not use damaged batteries.
Keep connections clean and dry to avoid operational problems.
Do not exceed the recommended power specifications.
Store the equipment and the batteries in a safe place, away from excessive heat and humidity.
If you notice anomalies, overheating, leaks or any other problem, stop using it immediately and contact us.